This project isn't specifically a build project, but it is something that I have wanted to put together for a long time. When I was in Nepal I picked up a small "legit" Northface mini pack as I thought it would be good for first aid kit, something that I have never...
In an on-going to quest to log all the projects that I work on I am going to keep this article as a running log of all the improvements, changes and maintenance I have done to my 350z. Blacking out the badges and bumper I had seen a few Z's rolling around with blacked...
Over the years of fixing stuff I have managed to gather a pretty good selection of tools and equipment that has allowed me to fix and repair almost anything that has come across my desk so I thought it was about time I did an article detailing out what I think it is...
Thought I would do a bit of a run down of what I consider my 'Toolbox Essentials'. These are the minimum tools that I consider you must have in a home workshop toolbox. Everyday tools These I consider everyday tools, I use these everyday and every week on almost all...
As I have always been known for, if something needs to be fixed I will almost always get asked to do it. Everytime I went home or to my friends houses I was inevitably asked to fix something. So i decided to use up the spare carry case I had and build my "ultimate" go...
Another addition to the modded collection, are these two 1970's National Panasonic portable radios I saved from the tip in my poppas shed ( the shed has been a wealth of projects ). Since both of these seemed to be in okay condition cosmetically, I thought it would be...
Since forever I had carried one of those horrible plastic ticket and passport holders you get from the travel agencies when they give you your tickets. I have always destroyed them or them disintegrate by the end of my trip. I finally gave in and purchased some scrap...
After constantly dropping chains and having gear shifting issues I decided to move up with the times and convert my 2016 Giant Reign 2 to a 1x system. But since those were hundreds of dollars I scoured Trademe to find a good condition second hand setup that would get...
For a while I frequented the local tip shop/refuse centre where I often picked up broken tech that I could repair or give a new lease on life. On this trip I managed to find an old Ryobi belt sander sitting in the corner at a $10 price tag. It looked in pretty good...
Well I finally got fed up with ironing on PCB transfers and how crap the turn out. A bunch of eBay orders accumulated over a few years and i’m putting together a UV LED exposure box! I had seen a few of these online but no full instructions to do one. I wanted a...